tel.: +353 1 588 1374
Contact us
One Park Drive, Wood Wharf

PERI Products

You can view the full range of PERI products below.

All Products

Use the filter function below to find the product you're looking for and its application.

Find the matching solution for your needs

Show Filter
  • Products 
  • Projects 
The PERI Screw-On Sleeve is a simple and cost-effective device for the temporary mounting of edge protection on reinforced concrete slabs
M16 Screw-On Sleeve An extremely fast, safe and efficient device to aid fixing edge protection to slabs
VT 20 Alpha 3S A 3-layer timber board girder with low weight and long maximum lengths.
VT 20
VT 20 Alpha Girder The PERI timber formwork beam VT 20 Alpha is the cost-effective, 20 cm high full-wall girder with high-quality Nordic belted timber.
Formwork carriage used on the steel substructure for the construction of carriageway slabs
VARIOKIT VCC Composite Formwork Carriage Formwork carriage used on the steel substructure for the construction of carriageway slabs
The lightweight for new construction and refurbishment projects
VARIOKIT VGK Cantilevered Parapet Bracket The lightweight for new construction and refurbishment projects
The system consists of different types of load and length optimized frames, which enable to continuously create every span with the corresponding combination.
VARIOKIT VRB Heavy-Duty Truss Girder For the transfer of high loads along large spans
The mobile solution installed below for bridges over 150 m long
VARIOKIT VGB Cantilevered Parapet Track The mobile solution installed below for bridges over 150 m long
Scaffold-free cantilever formwork for steel composite and precast concrete bridges
VARIOKIT VCB Cantilever Bracket Scaffold-free cantilever formwork for steel composite and precast concrete bridges
You can analyse the data collected from the sensors and submitted to the cloud in real-time from anywhere.
InSite Construction Web Application The InSite Construction Web Application stores data and enables real-time analysis when used in conjunction with PERI sensors
The PERI InSite Pressure Sensor was used on the Regent Street Flyover project in Leeds.
PERI InSite Pressure Sensor Pour at optimum speed with accurate pressure measurements throughout your formwork
Concrete Sensor Technology from PERI UK
PERI InSite Temperature Sensor Measure the temperature at different points in your concrete so you can strike when it’s right
Time-saving forming with MX tie technology as well as the best concrete finishes
MAXIMO Panel Formwork The cost-effective system with MX tie technology simultaneously provides the best concrete finish.
The universal lightweight formwork for walls, columns and slabs
DUO System Formwork The universal lightweight formwork for walls, foundations, columns and slabs
Continuously adjustable circular formwork for radii greater than 1.00m without panel alterations
RUNDFLEX Circular Wall Formwork Continuous and quickly adjustable circular wall formwork for radii with diameters greater than 1.00 m
SB Stützbock: Zuverlässiges Betonieren von einhäuptigen Wänden bis 8,75 m Höhe.
SB Brace Frame Reliable load transfer for single-sided forming operations up to 8.75 m high
The drive rails are available in two variants, depending on the type of project at hand: RCS MAX C and CL. Both allow the platforms to be moved safely in 750 mm increments.
RCS MAX Rail Climbing System The new RCS MAX Rail Climbing System is a further development of our tried-and-tested RCS Climbing System. It revolutionises the climbing process, thus maximising speed, economic efficiency and safety on your construction site.
Flexible girder wall formwork, also for high-grade architectural concrete surfaces.
VARIO GT 24 Girder Wall Formwork The variable Girder Wall Formwork System with the proven Lattice Girder GT 24
HANDSET Alpha offers a high degree of application flexibility. The panels can be used for a wide range of construction projects.
HANDSET Alpha Panel Formwork Robust and economical formwork system for crane-independent applications
SKYDECK Finply Panel Slab Formwork: The lightweight and proven aluminium panel slab formwork with short shuttering times.
SKYDECK Panelized Slab Formwork The proven aluminium panelized slab formwork with very fast shuttering times
The flexible and adjustable slab formwork with VT 20K or GT 24 Formwork Girder
MULTIFLEX Girder Slab Formwork The flexible girder slab formwork for all ground plans and slab thicknesses up to 1.00 m
The galvanized tubular steel slab prop with up to 50 kN load-bearing capacity
PERI PEP 20 and PEP 30 Tubular Steel Props High load-bearing capacity with low dead weight
All heights, all cross-sections, regardless whether square or rectangular-shaped
VARIO GT 24 Column Formwork For continuously variable cross-sections, all heights and architectural concrete requirements
Flexible column sizes, ranging from 150 mm x 150 mm to 900 mm x 900 mm and up to 75 kN/m² concrete pressure, can be formed without extra tie rod.
HANDSET Alpha Column Formwork Robust and economical formwork system for crane-independent applications
RCS Rail Climbing System: The universal modular system for a wide range of applications
RCS Rail Climbing System The universal modular climbing system for a wide range of applications
With PERI SCS, the loads from the fresh concrete pressure are transferred without formwork ties through the brackets into the climbing anchors of the previous concreting section.
SCS Climbing System The solid bracket system for single-sided and two-sided climbing formwork operations.
The Self-Climbing System ACS-R with the one-sided reinforcement scaffold in advance.
ACS Self-Climbing System Achieve shorter cycle times with hydraulic climbing.
The CB climbing system provides safe working conditions with wall formwork at all heights.
CB Climbing Formwork Crane-movable climbing units – bracket platform with large-sized wall formwork
FB 180 Folding Platform System: The universal working and safety scaffold.
FB 180 Folding Platform The universal working and safety scaffold
LPS Screen - The lightweight climbing protection panel
LPS Lightweight Climbing Enclosure The protection system with lightweight mesh elements
HR Render image of the PERI VTC Tunnel Carriage
VARIOKIT VTC Tunnel Carriage VARIOKIT system solutions for cut-and-cover and mining techniques
Supporting structures cost-effectively erected with system – with materials and expertise from a single source
VARIOKIT Engineering Construction Kit Cost-effective realization of civil engineering solutions with the modular construction concept
VARIOKIT Heavy-duty shoring: Either the Heavy-Duty Tower as the Truss Girder are adjustable to the correct height and length.
VARIOKIT Heavy-Duty Shoring The shoring system for heavy loads in bridge construction and special applications in industrial construction.
Construction of superstructures using the balanced cantilever method – fast and dimensionally-accurate
VARIOKIT VBC Balanced Cantilever Carriage The rentable balanced cantilever equipment for bridge construction in record time
VARIOKIT Cantilevered parapet system: A safe and clean solution for short bridges and redevelopment.
VARIOKIT Cantilevered Parapet Systems Optimized Solutions for all requirements and measurements
VARIOKIT Composite bridge system: The formwork carriage, which consists of rentable standard material, is optimally adapted to the geometrical and static boundary conditions and therefore provides a very cost-effective solution.
VARIOKIT Composite Bridge System Mobile or stationery solutions for composite bridges — with the VARIOKIT modular system both are possible.
Precision-made for an individual design
Freeform Formwork Precision-made for an individual design
PERI Clean, PERI Bio Clean and PERI Plasto Clean - Concrete release agent for all formwork and equipment
Release agent Concrete release agent for all formwork and equipment
PERI tie systems: The DK and SK tie systems serve to ensure subsequent, reliable sealing of tie points.
PERI Tie Technology Reliable sealing of tie points
RS Push-Pull Props: A complete programme, can be telescoped to reach a length of 14.00 m
RS Push-Pull Props A complete programme with extension lengths up to 14.00 m
Temporary edge protection for your projects.
PROKIT The safety system for temporary edge protection.
GT 24 Schalungsträger: The versatile lattice girder with high load-bearing capacity
GT24 Girder Crucial for the rentability of formwork projects
The MXK Bracket System provides high level of safety whilst requiring little installation effort. The lightweight system components are manually-assembled on the ground.
MAXIMO Bracket System MXK The flexible working platform solution with lightweight brackets
With the ISC SONO WZ Analyser, the water content of fresh concrete can be quickly and precisely determined on site.
SONO WZ Concrete Sensor The most efficient way to measure water to cement ratio on site in 2 minutes
MULTIPROP Aluminium Slab Props: Used as a cost-saving lightweight individual prop and cost-effective shoring tower
MULTIPROP Aluminium Slab Props Cost-effective for use both as a lightweight slab prop and shoring tower
The latest addition to the PERI UP scaffolding toolkit, PERI UP Easy is designed to improve both safety and productivity for façade applications.
PERI UP Easy Scaffolding PERI UP Easy is the latest addition to the PERI UP scaffolding toolkit designed to improve both safety and productivity for façade applications.
PERI UP Flex Modular Working Scaffold: Extremely flexible work scaffold for a wide range of applications.
PERI UP Flex Modular Scaffolding Flexible. Safe. Fast
Extremely adaptable and with a high load-bearing capacity
PERI UP Flex Facade Scaffolding Extremely adaptable and with a high load-bearing capacity
The lightweight stair tower for flexible access solutions
PERI UP Flex Stair 75 The lightweight stair tower for flexible access solutions
PERI UP Flex Stair Steel 100,125: For high requirements regarding load bearing capacity and accessibility.
PERI UP Flex Stair 100 / 125 Site stairs for high load-bearing and accessibility requirements
The PERI UP Loading Bay in a standard arrangement can be loaded up to 10kN/m²
PERI UP Loading Bay Load material safely with integrated storage access
The suspended scaffold can be manoeuvred with little effort due to smooth plastic rollers.
PERI UP Flex Suspended Scaffolding Easy to move suspended scaffold
PERI UP Flex Reinforcement R75,100: Modular Reinforcement Scaffold for efficient work.
PERI UP Flex Reinforcement Scaffolding Practical scaffold units for working on the formwork – extremely stable without ballast or anchors
For wide-span working platforms and temporary pedestrian footbridges
PERI UP Flex Working Platform LGS 150 For wide-span working platforms and temporary pedestrian footbridges
PERI UP Rosett Staircase Public 150, 200, 250: Stair geometry and landing arrangement meet the requirements for public access.
PERI UP Rosett Public Stair The stairs for meeting the highest requirements in public areas
PERI UP Flex Weather Protection Roof: Standard components are the basis for variable roof shapes.
PERI UP Flex Weather Protection Roof Reliable protection against the effects of the weather with the lattice girder system – also for large spans
PERI UP Flex Shoring: The maximum level of flexibility.
PERI UP Flex Shoring The maximum level of flexibility in shoring solutions
The maximum level of flexibility in shoring solutions Shoring Systems
PERI UP Flex Shoring Tower The maximum level of flexibility in shoring solutions
The heavy-duty prop with integrated load control HD
PERI UP Flex Heavy-Duty Prop HD The heavy-duty prop with integrated load control
The tubular steel prop for daily use on construction sites
PEP Alpha-2 Slab Props The tubular steel props for day-to-day use on construction sites
Coated import plywood for loose formwork purposes from PERI
Chinese Film Faced Plywood Low cost film faced plywood
High quality softwood panel
Paged Form High quality softwood plywood with a smooth board finish
Ultraform
Ultraform MDO Medium Density Overlay (MDO) Plywood, made with 100% Douglas fir veneers, for various formwork applications, giving a smooth matt finish.
Softwood Plywood for use in multiple applications
Pourform 107 Medium Density Overlay (MDO) Plywood, made with 100% Douglas fir veneers, for various formwork applications, giving a smooth matt finish.
Tulsaform
Tulsaform MDO Medium Density Overlay (MDO) Plywood for various formwork applications, giving a smooth matt finish.
PERI FinPly Filmfaced plywood for smooth fairfaced concrete requirements
Birch Film Faced Plywood Film Faced Plywood for high end smooth fairfaced concrete finishes
Elliotis Pine from PERI is an import plywood for the packaging industry, the timber construction and other sectors.
Elliottis Pine Plywood for universal applications
Visualization plays an increasing role in all stages of the construction process. The communication, safety and efficiency of many processes benefit from detailed virtual models.
Mixed Reality at PERI Visualisation is becoming more and more important in all phases of construction. Communication, safety and the efficiency of many processes benefit in particular from detailed virtual models
Plan your build easily.
PERI QuickSolve Planner Quick and easy planning of floor plans. Automatically generated formwork and scaffolding solutions for various systems. With intuitive clocking, clear parts lists and output of your solution in 2D and 3D.
The CAD program for professional work preparation
Software PERI CAD 24 The CAD program for professional work preparation
App icon PERI Formwork Load Calculator
Formwork Load Calculator Use the PERI wall formwork and anchor systems cost-effective and efficiently
Track your construction materials.
PERI Locate App The App for intelligent material management that works exclusively with PERI's asset tracking products.
App icon PERI MULTIFLEX Girder-Slab Formwork Configurator App
MULTIFLEX Girder Slab Formwork Configurator Optimize beam/prop spacings and props fast and easy
App icon PERI ST 100 Stacking Tower Configurator
ST 100 Stacking Tower Configurator Calculate the permissible leg loads of the system configuration for PERI ST 100 Shoring Tower fast and easy
VGK Design Tool
VGK Design Tool With the VGK Design Tool the user determines easily, quickly and precisely the permissible width of influence of the VGK Cantilevered Parapet Bracket for various boundary conditions.
BIM Software Image
Building Information Modeling (BIM) PERI provides a range of BIM services to benefit all aspects of formwork and scaffold design.

Interested in learning more about our products?

Call us on 01 588 1374 to discuss your requirements further.

Submit a form